HOW TO pick the right repair Material

Should I use drywall mud, spackle, hot mud? 3 Sparkle materials are reviewed in this video. Hope it helps with small projects.

Below are links to the products on Amazon. As an affiliate we benefit when you purchase something from the links below.

 Red Devil ONE Square Qt. https://amzn.to/3Ehximc

3m Tube https://www.amazon.com/gp/offer-listi...

DAP Fast Dry. https://www.amazon.com/gp/offer-listi...

Goldblatt putty knives https://amzn.to/3DIEurA

Goldblatt 12” panhttps://amzn.to/3h5xbk0

Transcript: 

How to Pick the Right Repair Material

So, this is Dennis with Home Rehab Pros. It's good to have you with us today. We have some painting we need to do in this house, but before that, we have some wall patching to take care of. We've encountered some cracked walls that could be caused by paint, drywall, or plaster work underneath. I'll show you in a moment what I'm referring to. Let's take on this challenge. If you're planning to paint your house or have similar repairs, gather your courage and tackle it, because I believe you can do it. Let's get started.

To give you a closer look, there it is. This is the mess we need to fix. Let's begin and see what we're dealing with. I'll start with a five-way paint scraper – sturdy and rigid. Let's see exactly what needs addressing as I delve into this.

[Music]

It appears that the issue isn't with plaster or drywall, but rather with the paint itself. It's chipping and peeling. We'll scrape off as much of it as possible and prep the wall for repainting. Let's continue the scraping process.

[Music]

Our main goal is to remove all the loose material. We need to ensure proper preparation. I'm considering using spackle to smooth out the surface, rather than dealing with the complexities of drywall mud or durabond. Let's continue scraping and assess the wall's true condition.

[Music]

[Laughter]

[Music]

[Laughter]

Alright, I believe I'm finished with that. I've removed all the loose material and uncovered any cracks. What I'm mainly dealing with are ridges from the old paint. I want to avoid painting over them, as they might show through. So, I'm going to try using some spackle. I'll apply it to create a nice, even coat. This should fill in the imperfections, without the need for a lengthy drying process. Let me show you the material I'll be using before we proceed.

I've opted for a product called "One Time" from Red Devil. It's efficient and eliminates the need for sanding. It claims to fill holes in a single step, and I've had success with it before. I'll mix it up a bit in a drywall pan for easier application. Let's get started.

Using a smaller knife, I'll scoop a suitable amount into the pan. I'll work the material a bit to make it easier to spread. This spackle has a creamy texture that's pleasant to work with. Now, I'll use my four-inch knife to apply it to the wall.

[Music]

Alright, I want to ensure there are no ridges. Although this spackle can be sanded, I'd like to minimize the need for sanding if possible. This first coat is complete. We'll let it dry for about half an hour to assess its texture.

After some time has passed, I've decided to apply a second coat in certain areas. Given the extensive repair, I'm experimenting with the spackle on this job. Let's proceed with the second coat and see how it turns out.

Using the same process, I've mixed a bit of spackle in the pan for easier handling. Now, let's apply another thin coat to further smooth out the surface.

[Music]

The second coat is working quite well. I'm being careful not to apply too much, focusing on eliminating ridges and achieving a smooth finish. I'm pleased with how it's looking.

[Music]

Alright, I'm going to let that dry, and then we'll move on to the painting process.

We're back after allowing some time for the spackle to dry. I've also acquired a gallon of paint to complete the project. Let's see how it all comes together.

The spackled surface feels nice and smooth, and since sanding isn't necessary according to the product instructions, I won't be sanding it. Now, I'll proceed with the painting. I have a paintbrush and a small roller for the areas around the door. Let's begin by cutting in the edges carefully.

[Music]

Now that the cutting in is done, I'll load up the roller with plenty of paint and start rolling it onto the wall. I'm being generous with the paint to ensure good coverage.

[Music]

I'm applying the paint in one direction and back rolling it to ensure an even coat. This way, I'll avoid any noticeable texture on the wall.

[Music]

That's the extent of my work for now. We'll let the paint dry and see how it looks after about an hour. This has been Dennis from Home Rehab Pros. If you enjoyed the video, please give it a thumbs up and share your thoughts in the comments. Feel free to suggest alternative methods or share your own experiences. Check the video description for details about the products and tools used. Don't forget to subscribe to stay updated with our videos. Thank you for watching, and we'll see you in the next video.