HOW TO Paint a Counter Top
When you have a laminate counter top that you want to upgrade but can't afford it you can try to paint it. We used a simple color, but you can order a variety of colors and mixes to spice it up .
We LOVE the Wooster Paint cup that you see in the video. If you want to get one, or two, along with the liners you can find them at these links.
Wooster Paint Cup. https://amzn.to/3mW6QZF.
Liners https://amzn.to/3yP6XZn
Transcript:
How to Paint a Counter Top
Hello, this is Jason from Home Rehab Pros. Today, we're going to guide you through the process of refinishing or painting a countertop. It's a much more cost-effective option than replacing the countertop, and it's a manageable project for homeowners. As you can see, one side of the kitchen countertop has already been painted. We'll demonstrate how we accomplished that.
The product we're using is Rust-Oleum Countertop Coating, an oil-based acrylic. This makes it a bit trickier to work with compared to latex paint used for walls. We'll provide you with some helpful tips for the process. The most crucial aspect we want to emphasize is proper countertop preparation, which is key to your success. Firstly, ensure that the countertop is meticulously clean. You can use a pre-paint cleaning product like TSP, which removes grime and grease without leaving residue. Avoid using regular cleaners or degreasers, as they may leave unwanted residue.
Our prep involved thorough cleaning followed by sanding with 150-grit sandpaper using a power sander. For surfaces like Formica, a light scuffing is sufficient for paint adhesion. Since this countertop had been painted before, we had to ensure the edges were smooth from the old peeling paint. Sanding and cleaning are crucial steps.
During this process, we masked off the walls to make the job easier and minimize cleanup, especially since we have a brick backsplash in this kitchen. Adequate ventilation is essential when working with the Rust-Oleum countertop coating due to fumes. Ensure good airflow with fans and open windows.
Now, onto the painting process. We're using a foam roller, specifically a four-inch mini roller with a foam quarter-inch nap. To avoid lint, we recommend taping and cleaning a regular quarter-inch nap roller. However, a foam roller is less likely to leave lint on the painted surface. We're also using a fine-bristle brush designed for oil-based paints.
Begin by mixing the paint well. Starting with the backsplash, apply paint using small, controlled strokes. This type of paint is self-leveling, so it will smooth itself out. When working on the edges, be careful not to overwork the paint, as it sets quickly. For the larger surface area, load up the roller and spread the paint evenly. Use light, gentle strokes to achieve a nice finish.
Remember that the paint sets rapidly, so avoid overworking it. If you notice imperfections, it's better to do touch-ups after the paint sets rather than overworking it during application. Be prepared with paper towels and mineral spirits for quick cleanup.
Always maintain good ventilation during the process to avoid fumes. Take breaks if needed to prevent feeling light-headed.
Overall, this method is a cost-effective way to refresh an old countertop and give it a new appearance. Just ensure proper prep, use the right tools, and work methodically. With patience, you can achieve a professional-looking finish. Thanks for watching, and have a great day!