HOW TO install a window in an Emergency

Vandals destroyed this window. We had to find a STOCK window and install it. We had to frame, install, trim, and caulk to make it work but it turned out great.

Transcript:

How to Install a Window in an Emergency?

Hello, this is Dennis from Home Rehab Pros. I hope everyone is doing well. Today, we have an emergency job on our hands. Someone vandalized this house, and although the rest of the house is complete, they broke this window. Ordering a replacement window would take six to eight weeks. Our plan is to find a window that fits the opening, or if necessary, adjust the opening to make it fit. Our goal is to complete this today. Let's dive in and see how we tackle this challenge.

Firstly, we'll measure the rough opening since the window and trim are gone. I measured the width at 40 inches and the height at 45 and 7/8 inches. The other side measured 45 and 5/8 inches. So, the rough opening is 40 by 45 and 5/8 inches. Now, we'll look for a window that matches these measurements.

We found a window that is 45 and a quarter inches tall, but it's only 36 inches wide, which is four inches too small for the opening. However, we'll see if it fits height-wise and then address the width discrepancy.

After installing the window and realizing the width gap, we decided to close the gap using two-by-fours on each side. This may not be ideal, but it's an emergency solution to ensure the window fits snugly.

Next, we proceed to install the window. We insert the window, ensuring it's centered, and secure it using a brad nailer and PVC trim. Despite the initial gap, we manage to frame the window nicely.

Following the window installation, we address the remaining gap on the sides with the help of pre-cut stops. We rip them to the right size and then secure them in place. Afterward, we apply caulking to seal any gaps and achieve a polished finish.

During the caulking process, we demonstrate the technique, using a damp paper towel to wipe excess caulk and create a smooth surface. We also address small nail holes and blend them seamlessly with the caulk.

Although the situation wasn't ideal, we successfully completed the emergency window installation. Despite having to modify the opening and use two-by-fours, the window fits well and looks finished. We encourage you to take on DIY projects with confidence. Thanks for watching, and if you found this video helpful, please consider subscribing and giving us a thumbs up. We look forward to sharing more videos with you in the future. This is Dennis from Home Rehab Pros, signing off.