HOW TO Install a NEW Toilet yourself
How to install a new toilet over a new floor. From putting the toilet together to placing it on the floor, to putting the seat on it. Here is a step by step video on how to do it. Even the tools that you will need.
Transcript:
How to Install a New Toilet Yourself
Hello again, I'm Jeff with From Home Rehab Pros, and we're in the final stages of a bathroom remodel. Today, we'll be demonstrating how to install a toilet. We have all the necessary components conveniently packaged in the same box, so we're ready to proceed. Let's walk you through the process step by step.
First, let's gather the tools and items needed for toilet installation. Here's what we have:
- Wax ring
- Toilet bolt covers
- Flange (to seal the tank to the base)
- Phillips head screwdriver
- Crescent wrench
- Flat head screwdriver
- Channel locks
These tools should be sufficient for the task at hand. Now, let's move on to the toilet tank installation.
To begin, carefully turn the tank upside down. Handle it with care, as it can be fragile. Place the provided flange ring over the top. This is a crucial step, as it ensures a watertight seal when you flush. The flange ring also contains the bolts necessary for attaching the tank.
For this particular toilet model, there's a bracket that accommodates square-piece bolts. These bolts fit into the bracket, ensuring proper alignment. Make sure they are securely in place.
Now, let's install the washers and nuts for the bolts. After threading the bolts through the holes in the tank, attach a washer and then a nut to each bolt. Use a crescent wrench to tighten the nuts, being cautious not to over-tighten and risk damaging the porcelain.
With the tank securely in place, we'll move on to connecting the water supply line. Ensure a tight connection under the valve to prevent leaks when water is turned on. Double-check for any signs of leakage before moving forward.
Next, we'll position the wax ring. Place the wax ring on the flange, ensuring it's centered and steady. The wax ring comes with a cover; remove the cover and place the wax ring on the flange, aligned properly.
Now, it's time to place the toilet over the wax ring. Gently lift the toilet and align the bolts with the slots on the toilet's base. Carefully lower the toilet onto the wax ring, ensuring the bolts go through the slots.
Attach the provided bolt covers to the bolts, making sure they are in the correct orientation. These covers will snap into place once installed properly.
After securing the toilet to the floor, it's time to attach the water supply hose to the valve. Tighten it to prevent leaks. Open the valve to allow water to fill the tank, and check for any leaks around the fittings.
Once you're confident there are no leaks, you can proceed with a practice flush to ensure everything is working as expected. Monitor for any signs of water leakage during and after the flush.
Finally, carefully place the toilet lid onto the tank, ensuring it sits securely.
With the toilet fully installed and tested, the last step is to attach the toilet seat. Insert the bolts through the holes in the seat and secure them with the provided nuts. Use a screwdriver to ensure the seat is properly aligned and tightened.
Congratulations! You've successfully installed a toilet. Remember, while we've provided a comprehensive guide, it's important to refer to the specific instructions for your toilet model, as installation steps may vary.