HOW TO Build a Window Frame to Replace a Picture WINDOW
We removed the old metal frame and now we have to build a new wood frame to install our Vinyl replacement windows. We need to center the middle post we will build and figure out how to evenly install the two windows so that they look nice once they are finished. Same reveal on each side so they are even.
We would appreciate your comments and suggestions. We have learned so much from our viewers. Thanks for your comments.
Transcript:
How to Build a Window Frame to Replace a Picture Window
This is Dennis with Home Rehab Pros. Not long ago, we released a video on how to remove a big metal window frame from an opening to prepare for vinyl replacement windows. In today's video, we will demonstrate how we frame the opening to ensure a proper fit for our replacement windows and prepare for their installation. Today's focus is on framing, measuring, and layout. I hope you enjoy the video. Jason is our carpenter for today, and I will be assisting. If you find the video helpful, please give it a thumbs up, and if you're not subscribed yet, we would greatly appreciate your subscription.
Now, let's move on to our Part Two video, which will show you how to transform a large metal picture window into two vinyl replacement windows. Keep an eye out for Part Three, coming soon. Let's get started.
Alright, now that we have removed the old window, we are getting ready to install the new replacements. These are our new bay windows. We have an opening here, and we need to determine how to center these windows for a visually pleasing look.
To start, we need to know the dimensions of the window. This particular window is 57 and a quarter inches in height, and the width is 30 and three-quarters inches. We have two of these double-hung windows.
Next, we'll find the center point of the opening. By measuring the width of the entire window, we find it's about 68 and a quarter inches. The center point is approximately 34 and an eighth inches. This means one window will fit on each side of the center. To achieve this, we'll use a two-by-four on each side and a double two-by-four centered on the center line.
For the height, we'll need to make some adjustments, likely building a sill, but we'll ensure it's well-fitted.
Now, we're going to frame the opening. We'll build a box using two-by-fours. We have our bottom plate positioned, and the rest of the box will be built accordingly. This framework will provide the structure for attaching our replacement windows. We'll follow up with trimming and finishing.
Let's move on to assembling the frame. We place a two-by-four on the sill, another on the header, and then two-by-four jacks towards the wall. It's important to cut these to fit precisely, not too tight, but snug. We're focusing on plumbness, ensuring our frame is vertical. Our next step is to stabilize the frame by anchoring it with four-inch screws. These screws will secure the frame in place.
With the frame stabilized, we proceed to install the center post. We'll toenail screws into the plate and header to maintain stability. The granite sill prevents direct attachment, so we use toenails for anchoring.
Thank you for watching. Your support through likes and subscriptions means a lot to us. In our next video, we'll guide you through the process of transforming this frame into two final replacement windows. Stay tuned, and please enable notifications to stay updated. We value your time and interest and strive to provide educational content. We look forward to seeing you in the next video.