DON'T Tape your Small Room until you watch this
On small projects I love to use STRAIGHT FLEX products with All Purpose compound. Sometimes I even like to use quickset mud with it as well. Below are some links to materials and tools that you can use in this process.
Original Straight Flex https://amzn.to/3tjt3Sv
Goldblatt Knives https://amzn.to/3kQc46g
Goldblatt knives 2 https://amzn.to/3DIEurA
Goldblatt 12” pan https://amzn.to/3h5xbk0
Mesh Tape https://amzn.to/3BOC09x
1 Gallon Mixer. https://amzn.to/2VnYXAQ
Thanks for watching.
Transcript:
Don’t Tape Your Small Room Until You Watch This
On a small utility job, we were drywalling. Yesterday, I spotted some screws and bedded some seams with mesh and durabond. Today, I'm going to work on the inside 90-degree angles and the corner bead. For the angles, I'll be using a product called Straight Flex, specifically the medium-grade option. Some people shy away from using it due to its cost, but I find it perfect for small jobs like this. It's easier to coat, sand, and install, and it provides a durable angle.
As for the corner bead, I'll also be using a Straight Flex product called "The Big Stick" corner bead. Let's start by measuring the corner bead and the angle to determine the length needed. The corner bead measures 84 and three-quarters inches, which is seven feet and three-quarters of an inch. I'll cut the corner bead accordingly.
This corner bead is marked with inch and foot increments, making it easy to cut. I'll start by cutting off the first 12-inch mark and then counting seven more foot increments, adding three-quarters of an inch at the end. This ensures a proper fit.
Now, let's move on to the Straight Flex product. It comes with measurement increments as well, both in metric and by the foot. I'll cut it at an even foot length. As I pull it out of the box, I'll count seven feet and a half to ensure accuracy.
For installation, I want the unmarked side of the Straight Flex facing the wall. I'll crease the entire length of the piece, creating a slight angle to help fit it into the corner effectively. With the bead and Straight Flex cut, it's time to mix the mud.
I'm using a small bucket of all-purpose mud, which is recommended for installing Straight Flex products. To achieve the desired consistency, I'll add a bit of water and mix it using a small paint mixer. The mud should drop off the knife smoothly without being too runny.
Now, let's apply the mud and tape. I'll start with the Straight Flex on the angle. Using my knife, I'll spread the mud evenly along the angle, ensuring there's enough to bed the tape. Then, I'll carefully place the Straight Flex tape onto the angle and press it in with the knife. I'll repeat this process on the inside of the angle, using pressure to embed the tape.
Moving on to the corner bead, I'll apply mud along the edge where the tape will adhere. Then, I'll press the corner bead onto the mud, running my finger along it to ensure a secure fit. After wiping away excess mud, I'll check for proper alignment and light between the bead and the knife.
That's it! With the Straight Flex and corner bead in place, the taping is complete. Thanks for watching, and if you enjoyed this video, please consider subscribing, liking, and leaving a comment. This is Dennis from Home Rehab Pros.